Technical specifications of tiles

Polymer tile produced by LLC “Pan-Plast”, fit all indicators and complies with the relevant national standards – DSTU B V.2.7-139 2007 “polymer sand tile.” 

Dimensions and weight of the of tiles are shown in the table below:

Type of tile

overall dimensions, mm

sizes
coating, mm

Weight
kg/pc.,
no more

Number of products
1 m2
(1 linear m.) Coverslips
pcs.**

length

width

length

width

1 Riadova
– “romanska”
– “panska”
395
400
305
310
350
350
290
290
2,2
2,2
9,85
9,85
2 Grebeneva
– “romanska”
– “panska”
314
310
216
240
297
290

1,6
1,6
3,37
3,45
3 Grebeneva first

326

216

1,8

4 Grebeneva last

326

216

1,9

5 Vitrova left

395

197

348

1,6

2,87

6 Vitrova right

395

172

348

1,6

2,87

**Warning! Shingles are sold in overall size in the number of 9pcs./sq. m.

Other characteristics of polymer-sand tile (according to the latest test):

  • failure load in bending 1.5 kN * (at a rate of not less than 1.5 kN);
  • 24 hour water resistance. * (At a rate of not less than 24 hr.)
  • Frost resistance 50 cycles * (at a rate of at least 50 cycles);
  • color fastness 4 points * (at a rate of no more than 4 points);
  • water absorption of 0.05% (at a rate of not more than 2.0%).

* – Controlled performance – test lasts only to the value specified in the standard.